Williams Sound WIR RX6 Installationsanleitung PDF herunterladen (Seite 24)

REAR

PANEL:

Mounting Holes: One set of threaded holes for use with the BKT 024 mounting bracket (included)

Two threaded holes on sides of the cabinet for Tripod Stand Kit

Baseband Input: BNC connector, 50 Ω, 50 kHz to 500 kHz carriers, 100 mV nominal per carrier,

10 V RMS maximum aggregate baseband amplitude

Baseband Output: BNC connector, 50 Ω, 50 kHz to kHz baseband

Baseband Cable: RG-58 Coax, BNC-connectors

Power: External power supply, 3-pin molex connector, 24 VAC, 50 or 60 Hz, 30 VA, 0.9 A nom.

current drain

Power Cable: NEC Class 2 wiring, 2-conductor, 18 ga.; 200 foot (61 m) max. length for 18 gauge wire

(See table below for minimum gauge requirements at other lengths)

Each TX8 Transmitter requires its own 24 VAC Power Supply

Cable Length Required Minimum Wire Gauge

Up to 10 feet (3 m) 22 gauge

Up to 75 feet (23 m) 20 gauge

Up to 200 feet (61 m) 18 gauge

Up to 500 feet (152 m) 16 gauge

Up to 1,000 feet (305 m) 14 gauge

TWO–CHANNEL INFRARED RECEIVER, MODEL WIR RX5

Size and Weight: 3-5/8" L x 2-3/8" W x 7/8" H (9.2 cm x 6 cm x 2.4 cm)

Color and Material: Gray, shatter-proof polypropylene

Battery Type: 1.5V (AA) x 2, Alkaline (BAT 001) or Rechargeable AA NiMH (BAT 026)

Battery Life: 30 hours with BAT 001, 15 hours/charge with BAT 026, 25 mA, nom. current drain

Modulation Frequencies: 95 kHz FM, 50 µS de-emphasis OR 250 kHz FM, 50 µS de-emphasis

Signal to Noise Ratio: 60 dB with WIR TX8

Controls: Combination volume/On-Off knob, Push–button channel selector,

Switched Low-Cut tone control Lo: 20 Hz / Mid: 120 Hz / Hi: 700 Hz

Audio Output: 3.5 mm mono mini phone jack, 35 mW maximum into 16 Ω

Acoustic Output: 130 dB MAX SSPL90 with EAR 013

The RX5 Two-Channel Infrared Receiver can be used with a Neckloop TeleCoil Coupler

(NKL 001) to magnetically couple into a hearing aid that has a telephone pick-up coil.

TEREO INFRARED

RECEIVER, MODEL

WIR RX6

Size and Weight: 3-5/8" L x 2-3/8" W x 7/8" H (9.2 cm x 6 cm x 2.2 cm)

Color and Material: Gray, shatter-proof polypropylene

Battery Type: 1.5V (AA) x 2, Alkaline (BAT 001) or Rechargeable AA NiMH (BAT 026)

Battery Life: 30 hours with BAT 001, 15 hours/charge with BAT 026, 25 mA, nom. current drain

Modulation Frequencies: 95 kHz FM, 50 µS de-emphasis AND 250 kHz FM, 50 µS de-emphasis

Signal to Noise Ratio: 60 dB with WIR TX8

Controls: Combination volume/On-Off knob,

Switched Low-Cut tone control (Lo: 20 Hz / Mid: 120 Hz / Hi: 700 Hz)

Audio Output: 3.5 mm stereo mini phone jack, 35 mW maximum into 16 Ω

Acoustic Output: 130 dB MAX SSPL90 with EAR 014

ACCESSORIES

CHG 200 Multi-Charger This charger is designed to store and charge one or two receivers simultaneously

overnight. 110 VAC

SS-6 Tripod Stand Kit Includes adjustable tripod stand, adaptor, mounting bracket, and hardware. Mounts

modulator and emitter together or separately.

RPK 005/RPK 006 Rack Panel Kits The RPK 005 mounts one modulator in one EIA rack space, the RPK 006 mounts two.

Includes all necessary hardware and easy-to-follow instructions.

Williams Sound Corp.

10399 West 70th St., Eden Prairie, MN 55344-3459

U.S.A. 800-328-6190 / 952-943-2252 / FAX: 952-943-2174

www.williamssound.com

1 2 ... 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Williams Sound WIR RX6 Installationsanleitung Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger Williams Sound WIR RX6