Williams Sound SoundPlus Infrared System WIR SYS 90V Installationsanleitung Seite 27

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 36
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 26
Williams Sound
®
Helping People Hear
27
OPTIONAL RECEIVER INSTRUCTIONS
FOUR CHANNEL RECEIVER, MODEL WIR RX12-4
Make sure the two “eyes” located on the front label of the receiver (Figure 22a) are not
covered up when in use. Do not place the receiver in a pocket or purse or it will not work
properly. A variety of earphones, headphones, or a neckloop telecoil coupler can be used
with the RX12-4 Receiver.
Step 1
: To install the batteries, open the battery compartment using a coin in the slot in the
bottom of the receiver. Press two AA batteries into place, observing proper battery polarity.
Step 2: Plug the earphone or headphone into the earphone jack.
Step 3
: Turn the receiver on by rotating the volume control knob clockwise.
Step 4: Select a listening channel (1-4) by rotating the channel control knob.
To avoid draining the battery, make sure the receiver is turned off when not in use. The
“on” indicator LED will flash to indicate a low battery.
RX12-4 Front View
4 channel
IR
Williams Sound
Infrared "Eye"
Charging
Contacts
RX12-4 Top View
EAR
On
Volume
Channel
OFF
1
2
3
4
Earphone
Jack
Volume/Off
Control Knob
On LED
Indicator
Channel Selector
Rotator Knob
Figure 26a
Figure 26b
Expected Battery Life: AA Alkaline Batteries (BAT 001): 60 hours
AA NiMH Rechargeable Batteries: 30 hours/charge
WARNING: Do not attempt to recharge zinc carbon (“heavy duty”), alkaline,
or lithium batteries. These batteries may heat up and explode, causing
possible injury and damage to the equipment.
•Avoid shorting the plus and minus battery terminals together with metal objects. Battery
damage and burns can result!
•Use only Williams Sound supplied chargers and batteries.
Charging contacts are designed for use with the CHG 200
Dual Charger and the CHG 1600 Multiple Battery Charger.
On LED indicator flashes to indicate low battery.
Channel Frequency
1 2.3 MHz
2 2.8 MHz
3 3.3 MHz
4 3.8 MHz
Seitenansicht 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare