Williams Sound WIR TX8 Installationsanleitung PDF herunterladen (Seite 17)

SYSTEM SPECIFICATIONS

INFRARED EMITTER, MODEL WIR TX8

Dimensions, Weight: 11.25" W x 6.25" H x 2.125" D (28.6 cm x 15.9 cm x 5.4 cm) 1.9 lbs. (0.9 kg)

Color: Black epoxy paint with white legends, red acrylic window

Wall Mount: BKT 024 mounting bracket included for wall and ceiling mounting.

Tripod Mount: Optional SS-6 Tripod Stand Kit available

Power: External power supply, 24 VAC, 50 or 60 Hz, 50 VA, 0.9 A nom. current drain

Emitter shuts off when baseband signal is not present

Operating Req.: 0-50° C ambient temperature, non-condensing, non-corrosive atmosphere

Coverage Area: Single-Channel Mode:

RX3 Receiver: 10,000 ft

(930 m

); RX7/8 Receiver: 6,000 ft

(560 m

); RX4 Receiver:

4,000 ft

(370 m

)

50° cone pattern; For larger areas, connect add’l WIR TX8 Emitters

Infrared Type: Class 1 LED Product

FRONT PANEL:

Power Indicator: Red LED, visible from bottom through vent holes, lower right

Baseband Indicator: Red LED, visible from bottom through vent holes, lower left

REAR PANEL:

Mounting Holes: One set of threaded holes for use with the BKT 024 mounting bracket (included)

Two threaded holes on sides of the cabinet for Tripod Stand Kit

Baseband Input: BNC connector, 50 Ω, 50 kHz to 500 kHz carriers, 100 mV nominal per carrier,

10 V RMS maximum aggregate baseband amplitude

Baseband Output: BNC connector, 50 Ω, 50 kHz to kHz baseband

Baseband Cable: RG-58 Coax, BNC-connectors

Power: External power supply, 3-pin molex connector, 24 VAC, 50 or 60 Hz, 30 VA, 0.9 A

nom. current drain

Power Cable: NEC Class 2 wiring, 2-conductor, 18 ga.; 200 foot (61 m) max. length for 18

gauge wire

(See table below for minimum gauge requirements at other lengths)

Each TX8 Emitter requires its own 24 VAC Power Supply

Cable Length Required Minimum Wire Gauge

0 – 10 feet (3 m) 22 gauge

0 – 75 feet (23 m) 20 gauge

0 – 200 feet (61 m) 18 gauge

0 – 500 feet (152 m) 16 gauge

0 – 1,000 feet (305 m) 14 gauge

Warranty: Five Years, Parts and Labor.

90 days on cords, earphones, headphones, batteries and other accessories

NOTE:

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Infrared receiver performance can be degraded if this system is used in close

proximity to high-efficiency lighting equipment with solid state ballasts (i.e. high

efficiency fluorescent) that operate at frequencies with harmonics near 95 kHz.

250 kHz operation should be used when this occurs

1 2 ... 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Williams Sound WIR TX8 Installationsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger Williams Sound WIR TX8